Designed and printed a Teeny Tiny Trainer while waiting for my Five33 Tiny Trainer FPVCrate kit to arrive
Based the general frame design on an existing Mob7 retrofit on Thingiverse, and the Camera mount on the Five33 TPU parts resized to fit the frame with improved lens protection, rest were custom built
Basically took apart an Eachine Novice I for its internals (essentially an upgraded Mob7)
Flies pretty well (its heavier than the mob7 frame by about 25% - 44g vs 32g) on 2S 420mah...
Printed on my Anycubic Photon in Siraya Blu v2 Resin
Files (WIP): https://www.thingiverse.com/thing:4627160
v6 of my cam mounts have a less aggressive 25deg cam mount to allow for some semblance of indoor flying... was almost impossible to fly around my house with the 40deg uptilt
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Looks sweet, how do you like the siraya blu resin? I've been messing around with blends of tenacious, blu and regular grey resin and i found a 50/50 blend of blu and tenacious makes for great canopys/pods. I've been trying to find a good resin for frames thats rigid but impact resistant since the tenacious and blu gets kinda soft at thinner thicknesses