Loki X3

By diddy2k on Feb 16, 2017

7 25 2

some leftovers from the sunken atom rx122

Photos

Part List

Frame	Storm Racing Drone Loki-X3 Frame Set (3 (6 builds) Helipal.com	$44.90
Flight Controller	PIKO BLX Micro Flight Controller (17 builds) Getfpv.com	$38.99
ESCs	Lumenier BLHeli_S 20A 4-in-1 BEC 5V 1.5A ESC DSHOT (3 builds) Getfpv.com	$38.99
Motors	4 x RCX H1407 (V2) 5000KV Micro Outrunner Brushless Motor (It's Time to Upgrade Your 1306 Motor) (4 builds) Myrcmart.com	$47.96
Propellers	DAL 3x3 Bullnose Props - 3030BN - Full Set – MultiRotorMania Multirotormania.com	$1.60
FPV Camera	Runcam Eagle 800TVL DC 5-17V FOV 130° Global WDR 16:9 CMOS FPV Camera PAL NTSC Switchable (59 builds) Banggood.com	$44.99
FPV Transmitter	FuriousFPV INNOVA V4 OSD-VTX board (20mm / 25~200mw) (3 builds) Helipal.com	$39.95
Antenna	Foxeer RHCP SMA Short Antenna - Choose your color – MultiRotorMania (30 builds) Multirotormania.com	$8.99
Receiver	Lemon Rx DSMX Compatible Satellite (21 builds) Readymaderc.com	$11.10

Show stores (6)

Like Copy Part List Follow diddy2k

Discussion

OdinRC Feb 18, 2017

Nice build I like that frame. How do you like the 5000kv motors? Are you running 3 or 4 s with them?

diddy2k Feb 20, 2017

Running 3s. The motors were originally from an Atom 122 that I was never going to run 4s on. This build is heavier so I would run a 4s setup in the future.

diddy2k Feb 22, 2017

3s with the bullnose or 3030 quad props on bg it was pretty fast for 3s, but they cannot handle the 3045 tri-props.

Whiffles Feb 16, 2017

Very nice! This is the first 3" build I've seen use a 4-in-1 and a PIKO FC. Did you print the 20mm converter? How tall are your aluminum standoffs?

diddy2k Feb 17, 2017

30mm standoffs, the eagle is a bit cramped inside. A friend printed the adapter in PETG. Had a small crash onto sidewalk, not bad, but now have distorted colors. Not sure if it's camera or vtx so I'll be changing out the innova for a vtx03 to rule out the issue.