I christened this the "Ninja" because it uses Flywoo's ninja motors and I intended it to be an agile freestyle build, but I didn't pay enough attention to weight and it started out as a brick at 775g with a Hero 8. It's been through two rebuilds (analog -> DJI air unit and then DJI air unit -> Caddx vista) and is currently closer to 650g with a Runcam 5 Orange. "Frankenstein" would be a more fitting name. It flies excellent though, in no small part thanks to the 5" preset tune from UAV tech.

There's nothing particularly special about the build itself. The Vista (20x20) is awkwardly stacked on top of the ESC (30.5x30.5) because that's where the air unit that it replaced was positioned (the air unit doesn't fit in the rear of the Source One frame because of the standoffs). I used a 3d-printed stack adapter from RDQ and it worked fine. This probably results in better weight distribution anyway. The one bit of bling is some purple LED racewire which looks pretty cool in the dark.

Here's some cinematic flying with the GoPro Hero 8 + ReelsteadyGo:

And here's some freestyle with the Runcam 5 Orange and no stabilization: