So after countless months of checking all the major fpv sites daily for this frame pyrodrone finally got some in so i hoped on buying ine right away. They only lasted a day and a half. I havent seen or heard of anyone building one with a fettec/kiss setup so i figured id give it a shot. it was a pretty tight build and it didnt come out as clean as i woukd have liked, but it flys really good and im pretty happy with it.
Frame |
BQE BANDOLERO 5″
Pyrodrone.com
|
$99.99 |
Flight Controller |
FETTEC KISS F7 FC V1.2 20x20mm-30x30mm
(33 builds)
Pyrodrone.com
|
$71.99 |
ESCs |
FETTEC ESC 4IN1 - 6S 35A 20x20mm
(9 builds)
Pyrodrone.com
|
$59.95 |
Motors |
4 x NewBeeDrone FLOW 2306.5 Racing and Freestyle FPV Motor 1850KV
(12 builds)
Newbeedrone.com
|
$79.96 |
Propellers |
HQ Prop ETHIX S5 5x4x3 Tri-Blade 5" Prop 4 Pack - Light Grey
(80 builds)
Racedayquads.com
|
$3.49 |
FPV Camera |
Foxeer Razer Mini 1200TVL CMOS 16:9 PAL/NTSC FPV Camera (2.1mm) - BlackDefault Title
(9 builds)
Racedayquads.com
|
$19.89 |
FPV Transmitter |
TBS UNIFY PRO32 HV (MMCX)
(119 builds)
Pyrodrone.com
|
$49.95 |
Antenna |
Foxeer Lollipop V3 5.8GHz Stubby SMA Antenna 2 Pack - Choose Your Polarization and ColorRed / RHCP
(60 builds)
Racedayquads.com
|
$19.90 |
Receiver |
FrSky R9MM OTA 900MHz Micro Receiver - ACCESS
(87 builds)
Racedayquads.com
|
$23.49 |
3D Printed |
BQE Bandolero Antenna Mounts
Brain3d.co
|
$7.00 |
3D Printed |
BQE Bandolero GoPro Hero 8 Mount
Brain3d.co
|
$15.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
that is still a clean build man. i almost bricked a fettec esc when i was soldering the positive batt cable, and looking at the photos you seem to have had a little of the same problem. its a shame that the pad is so close to the caps on the pcb!