Hey guys,
The basis for this project was a framework from GEPRC. I've always liked the setting. With the arms and motors above. Unfortunately, the frame is not very big and so it was quite good fiddling until everything was pasted well. I prefer to fly 6 inch freestyle. So I milled new arms in 6 inches. I also designed a lot of printed parts. The painting took some time. But it was definitely worth it. It flies very well with the super awesome engines from Rcin Power and the Iflight FC Aio. If you want to know anything just ask .. Greets**
Frame |
Geprc GEP-KHX7 Elegant 7 Inch 300mm Wheelbase 4mm Arm 3K Carbon Fiber FPV Racing Frame Kit
(2 builds)
Banggood.com
|
$74.08 |
Flight Controller |
30x30 Drone Flight Controllers for - RaceDayQuads
(2 builds)
Racedayquads.com
|
$44.99 |
Motors |
4 x RCINPOWER GTS-V2 2207PLUS 2207 1860KV
(15 builds)
Pyrodrone.com
|
$83.96 |
Propellers |
DALPROP Cyclone T6040C Longrange 3-Blatt, 2x cw + 2x ccw
Rcheli-store.de
|
See Site |
FPV Camera |
Caddx Vista Digital HD System for DJI HD FPV
(98 builds)
Pyrodrone.com
|
$164.99 |
Receiver |
TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER
(1499 builds)
Team-blacksheep.com
|
$24.95 |
Batteries |
Ovonic 1000mAh 6S 100C LiPo Battery with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-Motor Hobby DIY
(31 builds)
Amazon.com
|
$21.99 |
3D Printed |
Thingiverse - Digital Designs for Physical Objects
Thingiverse.com
|
See Site |
First of all: that build looks GREAT!
Forgive my ignorance here: what does "The licking in the clay took a couple of days." mean?
I love the landing gear you designed/printed!
Are you at all concerned with the weight of all those prints? I can see that (assuming you designed and printed all those parts) you spent tremendous time thinking, designing, and printing what you have made there. Your attention to form, color, and print settings are all commendable. I can see it would be near impossible to make myself remove key colors from the scheme you've generated here if it was mine, but that much weight affects a lot of things... Is that why you fly 6"? Does the extra prop area produce enough extra lift that you can be fully decked out in prints and not feel it? Or is it that you don't intend to fly a GoPro so it feels lighter than a 5" with a GoPro so you're basically killin' the game?
Sorry.. the translator was bad. I mean the painting took some time.
The printed parts are not heavy. They are 20% filled. you can without problems fly with a Gopro.
Difficult to explain why I prefer to fly 6 inches. I just think it's nicer than 5 inches. Try it yourself.
If you need any printing parts .. feel free to write to me.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
that's amazing! Could you please share the 3d print stl file of the caddx vista and antenna mount for this frame. Thank you very