UPDATE May 2021 : We have totally removed the foam and the 3D printed ducts and this quad is flying hundreds times better! We got 7 minutes flight time powering a GoPro Hero 6 naked or 3 minutes and a half at 40km/h carrying a full GoPro Hero 9 :O

This is our first cinewhoop build.
We wanted a cinewhoop strong enough to do some freestyle but also harmless in order to take some cinematic shots near people and things.
For this reason we decided for a 6S build, with the AlfaRC Cineboy frame that it is strong (and a bit heavy) but soft on the edges.

We also designed a custom ducts for this frame, in order to reduce the weight of the original ducts, thus reducing the gap between props and the same duct. You can find the duct ready to be 3D printed HERE.
This version of ducts is recommended as it really improves the lift of the motors!!

For adding a little bit of style, we also hydrodipped the carbon frame with a Galaxy theme.
Of course it is also waterproof thanks to the double layer of MG Chemicals - MG Silicone Conformal Coating.

It can fly for about 5 minutes with a naked GoPro or 3.5 minutes with a full GoPro8 on it (1000mAh 6S 75-150C).

More photos and videos:
YT Channel FPVFlow
IG 1 --> Veronique
IG 2 --> Alessandro