My first build...and because it's cold outside, i started with a whoop.
It was easier than i thought, but i had a few problems:
Motor plugs:
The motor plugs on the FC didn't fit into the frame without touching it, so I had to crop them in order to prevent vibration.
Binding xm+ reciever:
It came with LBT (EU) firmware and I didn't want to take on the procedure to flash it with the servo cable.
It took me a while to figure out that there's also a firmware for the multiprotocol module of my tx...
But still, i couldn't bind...after trying everthing all the youtube videos and forums suggested.
Finally it was rather a basic problem: apparently the two diversity antennas were to close together.
After separating them, it bound easily.
Photos
Part List
Show stores (10)
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
You plan on flying that inside?!
depends on how you define inside...but yes, I am✌