1/30/21: 2s 1302 and 2.5" props feels pretty good too. but you would need 2mm prop drill kit and drill props out right.
I also have tried gf3016 tri-blade props and it's good too. so i guess you choose and use the ones you like most.

it flies pretty nice. very light weight.
it's for those who want more power than 1s babytooth setup.
it needs more space than my little yard, but i'll be flying it in parks, in spring when the weather warms up.

part list:
42 grams dry
fpvcycle babytooth 2mm frame
fpvcycle 1302 7700kv
gemfan 3018
crazybee v3 10a with built-in receiver ( don't get built-in receiver if you want to fly anywhere )
newbeedrone v2 canopy
31grams, 2s 650mah HV Gnb ( use 18awg or 16awg wires for pigtail ( battery lead ) )
PandaRC 16x16 VTX
caddx ant lite camera ( camera angle is 35° )

PID tune:
it's good enough.
apply UAV tech toothpick preset. ( https://theuavtech.com/presets/ )
set motor_output_limit = 80
set thrust_linear = 25 for gf3018, and set thrust_linear = 50 for gf3016
apply PID in the picture

This video is with gf3016 tri-blade props. Also, i use set thrust_linear = 50. instead of 25 for gf3018.

Note: the weather is about to rain.
This video is with gf3018 bi-blade props.