I have an itch for 65mm builds! I have really enjoyed Ledroneclub 65mm Pickle frame in so many different configuration I never posted the build on rotorbuilds. This one will be different. I had CNCMADNESS mill me up parts for his Mango Ultralight Freestyle type build and began searching for the right parts.

I really wanted this to be 1s and 2s capable with good performance on both so I choose to go with the NewBeeDrone BL V1 AIO which offers light weight with its integrated vtx but also true 2s "10amp" capability. There really were no other motors I could find better suited for this than Flywoo NIN 1103 10500kv motors. Topped it off with Crossfire and a Runcam Nano3.

I am blown away with how well it performs on 1s! Betaflight version is factory installed at 4.1 and its running the stock tune but man this little guy is a sick . I am still making adjustments to xt30 and lipo placement due to 2s lipo lead length differences also plan on shortening camera lead length. I've yet to really SEND IT with 2s however its gone in a blink with light throttle adjustments and so quiet for the power under 2s. I have 6s rigs that dont kick this hard.

I am very very happy with how this build turned out and will be updating the build as it progresses.

2/11
Ive worked on the lead lengths and now have it configured where I'm able to run 1s 450mah-650mah and 2s 300mah-450mah securely. However I'm having issues with the crossfire rx I have installed in this giving me occasional range issues. I have made sure the dipole connection is being made and have tried two tested mini immortal T antennas with the same results. Sometimes getting rx loss as close as 25 feet away. I have another rx being delivered by pyrodrone any day and am going to stop being frustrated and risking damage of this build till I do a full rx swap.

2/22
Sold for 125.00 but kept the NIN motors and replaced with GEPRC 1103 8000kv motos