I have a used open source (APM) CX20, that I'm going to use to convert to an S500 frame, initially I'll reuse most parts, motors, esc's, FC, receiver, adding a PM to provide the 5v to the FC and receiver.
Eventually the plan is to upgrade motors esc's and FC and move my gimbal onto this frame.
Frame |
S500 Quadcopter Multicopter Frame Kit PCB Version with Carbon Fiber Landing Gear
Ebay.com
|
$25.99 |
Power Distribution |
APM2.5.2 APM2.6 Pixhawk Power Module V1.0 Output BEC 3A XT60 Plug UK Stock
(2 builds)
Ebay.com
|
$5.00 |
HD Camera |
Original XiaoMi Yi Ambarella A7LS BSI CMOS WIFI Sports Action Camera
Banggood.com
|
$75.99 |
Misc Parts |
Multi copter APM Flight Control Anti - Vibration Shock Absorber Damping Plate
Ebay.com
|
$4.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hey, Wondering how this worked, and how you wired the esc's to the board. did you only need to use the red and black wired ?
Hi, sorry for very late reply! Yes just two wires to provide power to esc's. It flies very well