This is NOT an original CMW BangGod frame!!!! I apologize, it is actually a clone from BangGood, and it cost about $50. Still a 6" beastly frame, just lighter on the wallet if you're in the market for this frame!

March 1, 2021:I acquired this frame as a completed build in January 2021. It included all of the parts listed below, minus the GPS module. I will be starting the renovations in the next few days! Also, I had noticed in my OSD when i flew the big guy, i didnt have amy battery readings. When I opened him up to check out everything, I found the FC wired as the picture shows below. the wires on the bottom left are the Rx wires, and the wires on the top right are from the VTX which I also need to fully configure!

BUILD 2 Dos:
-ReWire Crossfire Rx to an open UART.
-Connect TBS M8 GPS
-Configure VTX table in Betaflight
-Set up VTX power on 3 pos. switch
-ReMount VTX on standoffs w/ grommets
-Install onboard DVR(?)

So I will update this as i complete the buildup and refurbish of the big ol' beast! my intention is to have a long range mountain surfer with this one! ANY pointers and advice is greatly appreciated!

March 3, 2021: Removed the original Foxeer Predator camera, and dropped in a Runcam Night Eagle2 Pro! Also, I got the CRSF rx moved from UART1 over to UART4 because the IFlight Force VTX was soldered to the same UART. I also found there is a plug for the VTX which i plan to utilize!