FPVCycle Babytooth Night

By BaTTaN on Mar 19, 2021

8  360  1

This is a complete FPVCycle build using the 1.5mm Frame, V3 AIO, 13mm motors, and a market test adjustable nano camera canopy. I am using a Caddx Baby Ratel Starlight transmitting through an Eachine Nano V2. I have added a 16v 100uf cap on the GNB27 power connection as I was getting some noise without it.

Running a slightly larger canopy and heaver nano camera has bumped the weight up a bit but nothing that’s required adjustments or diminished performance or flight times. I'm currently using the stock camera connection leads as I’ve been making frequent adjustments based on the time of day I’m flying although I will be removing the connectors and trimming the wires down at a later date. I'm using RENY screws and nylon nuts as well as diatone M2 gummys on the AIO. Currently under 60g AUW with a 650mah HV LIPO.

This is hands down my favorite FPV platform to date!

Photos

Discussion

Sign in to comment

fw42   Mar 19, 2021  
1

Nice canopy

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more