Recently received a JJRC H95 "airplane" and it inspired me to make use of an old unfinished Guillows Piper Cub 95 that I built the air frame for a few years back. It fly's but it struggles to generate enough lift with the small props I have on it.
Doing some research now for some larger props that will fit the 1mm shaft of the 8520 motors. If I can get it to generate more lift I will put a small AKK AIO camera/vTX combo in it for some FPV flights.
Used an old Boldclash B03 Pro FC in it that I had sitting on the bench, and harvested the battery bay from an old Eachine E010 frame that had the correct mounting hole in it for the FC. A little bit of hot glue later and voila! :)
Frame |
Paul K. Guillow, Inc. - Piper Super Cub 95
Guillow.com
|
See Site |
Flight Controller |
BoldClash BWhoop B03/B03pro Receiver Board
(5 builds)
Boldclash.com
|
$5.99 |
Motors |
Makerfire 4pcs 8.5x20mm 15000KV Brushed Motors 1.0mm Shaft with Micro JST 1.25 2P Connector CW CCW 8520 Coreless Motors for Tiny
(3 builds)
Amazon.com
|
$9.99 |
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read moreFPV has had quite a journey. Just a few years ago we started racing drones around a track and doing flips over trees, but professional cinematic FPV is a more recent development. DJI has always owned the drone photography market, but smaller acrobatic drones are starting to enter the market. They have the advantage of close proximity flight indoors and around people. There's more artistic freedom and..
Read more
New Message for OptimaZe