Tried to make this 2fiddy build as clean as I could. All the wires are tucked away under the board so they wont get caught under the battery strap. I remixed the moongoat wire protectors to fit this frame. I knew from the get go I wouldnt be under 250 grams with a 550mah 6s battery, but I am not a stickler on the 250g weight limit. Once the 300-350mah packs become available I'll give them a try.
Photos
Part List
Frame |
2Fiddy Ultra Light Freestyle Frame
(23 builds)
Ummagawd.com
|
See Site |
Flight Controller |
Flywoo GOKU GN745 2-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC
(8 builds)
Racedayquads.com
|
$139.99 |
Flight Controller |
Flywoo GOKU GN745 F7 40A 2-6S BLHeli32 AIO Flight Controller
(9 builds)
Getfpv.com
|
See Site |
Motors |
4 x Ummagawd Aerolite 2004 1600KV Motor - Gunmetal/Gold v1.2
(6 builds)
Ummagawd.com
|
See Site |
Propellers |
Gemfan Hurricane SL 5125-3 Blade 5 inch Ultralite Racing Prop
(22 builds)
Pyrodrone.com
|
$3.29 |
FPV Camera |
DJI Caddx Vista + Nebula Pro - HD FPV vTX + HD Camera (Choose Antenna)
(199 builds)
Fpvcycle.com
|
$149.99 |
Receiver |
TBS Crossfire Nano Rx Special Edition FPV Long Range Drone Receiver
(163 builds)
Pyrodrone.com
|
$44.95 |
Batteries |
Talon FAF Series 550mAh 100C 22.2V 6S Lipo Battery with XT30 Connector
Heli-nation.com
|
$20.99 |
3D Printed |
2fiddy Motor Wire Protector by ikuiku
(2 builds)
Thingiverse.com
|
See Site |
Sorry for the stupid question but how did you mount those gemfan props to the 2004?
No worries! They are mounted with two M2 screws and the Triblade gemfan props come with a little plastic adapter that slides into the hub to convert it from a 5mm prop mount to a T mount. The second picture shows plastic hub adapter.
https://betafpv.com/products/gemfan-5125-3-blade-propellers-5mm-1-5mm-shaft
Bro thanks for the reply. I got the same props in, any tips on how to get the hub into the prop? Having a bitchin time trying to get it in lol.
Nevermind i got them in, had to smash it in.