It flies cool, in my opinion, a large throttle reserve
Callouts:
- ESC+FC+VTX: DIATONE MAMBA STACK F405 MINI MK2 /30A 3-4S/400MW VTX
- iFlight XING2 1404 3800kv
Update:
- The cam has changed from a Toothless 2 Micro to a Toothless 2 Nano (see photo at the end).
- And I prefer to use HQProp T3X3X3 (more durable) instead of Emax AVAN. Although if you want more calm flights, then the Gemfan 3016 Hurricane is very good.
- Shark Fin with antenna mount for lollipop 3: https://www.thingiverse.com/thing:4971210
Photos
Part List
Show stores (6)
Nice build...
Why did you use washers for the motor screws? Try
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Nice! One question: How did you fit the Avan 3 inch props onto the Xing2 motors? I found that the center pitch was hitting the top circumference of the bell. I wanted to use this props as others have suggested it goes well with this motor in simliar weight builds.
Thanks in advance!
Yes, they touch the bell and even get a little crumple when screwing, but this does not cause problems.
But in the end, I prefer HQProp T3X3X3 Poly Carbonate more.
They behave almost the same, maybe a little heavier, but noticeably stronger than AVAN