NanoLongRange with Elrs // benyi's recast

By benyi on May 19, 2021

9  559  6

NanoLongRange from DaveC FPV Remix

I asked a company specialized in 3Ds prototyping for the frame.
The built they came with is pretty nice and stiff, also the 18650 is well maintained in the frame.

Here is a small footage pushing the throttle hard, it flew 14/15 minutes cruising.

If you have any question/suggestion i'd be happy to answer them or take note of.

=============================================================
Betaflight "Diff all" :

start the command batch

batch start

reset configuration to default settings

defaults nosave

board_name CRAZYBEEF4DX
manufacturer_id HAMO
mcu_id 005d004f4b56500120313553
signature

name: nanolr

resources

resource LED_STRIP 1 NONE
resource SERIAL_TX 12 A00

feature

feature -ANTI_GRAVITY
feature SOFTSERIAL
feature TELEMETRY

beacon

beacon RX_LOST
beacon RX_SET

map

map AETR1234

serial

serial 0 64 115200 57600 0 115200
serial 1 2048 115200 57600 0 115200
serial 31 2048 115200 57600 0 115200

aux

aux 0 0 0 1800 2100 0 0
aux 1 1 1 900 1200 0 0

vtxtable

vtxtable bands 6
vtxtable channels 8
vtxtable band 1 BOSCAM_A A CUSTOM 5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B CUSTOM 5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E CUSTOM 5705 5685 5665 0 5885 5905 0 0
vtxtable band 4 FATSHARK F CUSTOM 5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R CUSTOM 5658 5695 5732 5769 5806 5843 5880 5917
vtxtable band 6 IMD6 I CUSTOM 5732 5765 5828 5840 5866 5740 0 0
vtxtable powerlevels 3
vtxtable powervalues 0 1 2
vtxtable powerlabels 25 100 200

master

set acc_calibration = -3,-19,-84,1
set mag_hardware = NONE
set baro_hardware = NONE
set rssi_channel = 16
set serialrx_provider = CRSF
set dshot_idle_value = 1000
set vbat_max_cell_voltage = 420
set vbat_min_cell_voltage = 250
set vbat_warning_cell_voltage = 300
set ibata_scale = 1175
set small_angle = 180
set gps_rescue_min_sats = 5
set gps_rescue_allow_arming_without_fix = ON
set osd_warn_batt_not_full = OFF
set osd_warn_batt_warning = OFF
set osd_warn_esc_fail = OFF
set osd_warn_core_temp = OFF
set osd_rssi_pos = 2362
set osd_tim_2_pos = 2423
set osd_flymode_pos = 2457
set osd_throttle_pos = 2392
set osd_vtx_channel_pos = 2100
set osd_current_pos = 2336
set osd_mah_drawn_pos = 2369
set osd_craft_name_pos = 2442
set osd_gps_speed_pos = 2177
set osd_gps_lon_pos = 2081
set osd_gps_lat_pos = 2113
set osd_gps_sats_pos = 2145
set osd_home_dir_pos = 2413
set osd_home_dist_pos = 2379
set osd_flight_dist_pos = 2209
set osd_warnings_pos = 2345
set osd_avg_cell_voltage_pos = 2401
set osd_disarmed_pos = 2314
set osd_core_temp_pos = 2305
set osd_pid_profile_name_pos = 2136
set osd_stat_tim_1 = ON
set osd_stat_max_spd = OFF
set osd_stat_battery = ON
set osd_stat_bbox = OFF
set osd_stat_bb_no = OFF
set vtx_power = 3
set vtx_freq = 5865
set gyro_1_align_yaw = 900
set name = nanolr

profile 0

profile 0

set vbat_pid_gain = ON

profile 1

profile 1

set vbat_pid_gain = ON
set p_pitch = 100
set i_pitch = 50
set d_pitch = 70
set f_pitch = 125
set p_roll = 90
set i_roll = 45
set d_roll = 65
set f_roll = 125
set p_yaw = 65
set i_yaw = 20
set f_yaw = 125

profile 2

profile 2

set p_pitch = 100
set i_pitch = 50
set d_pitch = 70
set f_pitch = 125
set p_roll = 90
set i_roll = 45
set d_roll = 65
set f_roll = 125
set p_yaw = 65
set i_yaw = 20
set f_yaw = 125
set d_min_roll = 42
set d_min_pitch = 46

restore original profile selection

profile 1

rateprofile 0

rateprofile 1

rateprofile 2

rateprofile 3

rateprofile 4

rateprofile 5

restore original rateprofile selection

rateprofile 0

save configuration

save

Photos

Discussion

Sign in to comment

mauk   Jul 14, 2021  

Hi, I'm building a very similar quad and I'm wondering how you connect this GPS module to the 5in1 Happymodel FC. Thanks in advance

benyi   Jul 15, 2021 

I added the pinout picture of the crazyf4 elrs in the build pictures,

You need to connect your gps to tx2 and rx2.
So you won't have smartaudio.

I had to update the board firmware with betaflight 4.2 to make my gps work.

Kakolukia   May 20, 2021  
1

Nice job!
I'm curious how this frame compares to the "original" Nano Longrange, both in weight and in endurance 😉

benyi   May 20, 2021 

Thank you !A
As you can see in picture '2' the weight is 13,85g including the built-in 18650 tray.
I'm looking forward to receiving the motors and flight controller, once I have them I will post more about the build !!

swg_fpv   May 19, 2021  
1

Clever frame design :)

benyi   May 19, 2021 

Thanks for your advice =) ! The credit goes to my dad for the design.

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more