I'd been following @sub250gfpv on Instagram for a while and got a couple of frames to test out. I went to install the 1404 Flywoo NiN motors I realized it only had 9x9 mounts. So after searching I found Brotherhobby had a 1404 motor with 9x9 mounting that supported 6s! So here we go. It's basically a GepRC Phantom with 3in props and some thicker carbon. I've been trying to tune out some vibrations and shoehorned the Polar Vista in there. I need to try some new camera mounts, but it's pretty tight in terms of tolerances. If the arms were 1mm longer then this would be perfect. Still searching for the perfect props, 3in pitch is too much, 2.8in is ok. I like the lower AUW than the babyhawk but I need to find the right prop. I might try the Tiny Trainer props and see what I get.
The frame is custom from @Sub250gFPV but it won't let me post it live with a custom frame so I put the geprc frame which is close.
Frame |
GEPRC Smart 35 Analog 3.5 inch Micro Freestyle Drone - PNP
(2 builds)
Newbeedrone.com
|
$239.99 |
Flight Controller |
HIFIONRC F7 2-6S 25A AIO FC + ESC Toothpick Flight Controller
(3 builds)
Getfpv.com
|
See Site |
Motors |
4 x BrotherHobby TC 1404 Motor- 2750KV
Pyrodrone.com
|
$67.96 |
Propellers |
Gemfan WinDancer 3028 Tri-Blade 3" Prop 4 Pack (5mm/1.5mm Mounting) - Choose Your ColorWhisky
(8 builds)
Racedayquads.com
|
$2.69 |
FPV Transmitter |
CADDXFPV Polar Starlight Vista Kit
(12 builds)
Caddxfpv.com
|
See Site |
Antenna |
iFlight Sigma 5.8GHz 60mm RHCP / LHCP FPV Antenna MMCX / UFL for FPV Racing Drone Quadcopter DJI Digital FPV (LHCP UFL Purple)
(6 builds)
Amazon.com
|
$1.00 |
Receiver |
TBS Crossfire Nano Rx FPV Long Range Drone Receiver
(1499 builds)
Pyrodrone.com
|
$24.95 |
Batteries |
HGLRC KRATOS 6S1P 22.8V 300mAh 75C Lipo Battery with XT30 Plug
(4 builds)
Hglrc.com
|
$18.99 |
Really nice! How are the motors? Didn't find much reviews about them. I just ordered them for my Vistapick build.
They actually are awesome! I totally put this thing into a curb on accident when I was hover testing. I forgot I was in horizon not angle mode and flipped it too low to the ground. I thought for sure this motor is borked, but it was fine! So they can take a hit and still work. The 9x9 mounting really opens up the possibility to some ridiculous builds. I had been using the Flywoo Nin v2 2750kv motors and just found Mamba 1206 motors that are also 6s I think 2850kv
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Fantastic Build mate 😁👍