Slammed Squirtek30 6s Redux v3

By ExplodingEvo on Sep 07, 2021

2  449  2

I can't abide the status quo. Fiddling with stuff is part of this hobby, right? I built a 6s squirt v2 and hated it. tmotor 1507s did not cut the mustard. in my 2fiddy adventures I found the 2203 stanfpv motors and they were ok, but not nearly high enough kv for 3in props.

pro tip
I find that the ducts like to pop off in bumps and stuff sometimes if you're flying gates and bump them. I drilled a hole and put a screw between the 2 ducts into the standoff to keep them secure. This might not be a problem in normal "cinewhooping" work, but I prefer the extra bit of security for my rough handling of this quad.

v3 edit
I decided to go back to the 2205 motors, I picked up a couple more frames after breaking one and a blue TPU set. I've decided the ProTek motors are what I want to stay with and moved the T-Motor 2203.5s to the CineMah. I'm rebuilding the black TPU frame with an Air unit and another pair of 2205s. I want to keep an air unit version on hand for any actual filming because it handles idling so much better.

v2 edit
Major edit: Things break in FPV. A lot. I spent the afternoon at the airfield flying with friends, put maybe 4 packs through my Squirt. That evening, I met up with a friend and plugged in a battery when, in a gout of flame, the stack burned up. Jury is still out on why, but no failed solder joints. It was the plug between the ESC/FC that somehow caused the failure.

But we can (did) rebuild it. We have the technology.

Slammed Squirt currently has an iFlight Beast F7 AIO, Vista, and iflight 2205 2300kv motors. Once I slap a ton of weight on the quad, it goes to work. It's fun to fly in the backyard and I can cruise in the house forever.

Part List


"Slammed Squirt" Full Kit (Carbon & TPU) — DRONE CO PRODUCTIONS

Flight Controller

iFlight Beast F7 V2 55A AIO Flight Controller Board FPV F7 AIO Board 25.5x25.5 Mounting for Cinewhoop Quadcopter Drone like Prot (13 builds)


4 x iFlight XING 2205 FPV NextGen Motor - 2300KV (7 builds)


iFlight 12pcs Nazgul Cine 3040 Tri-Blade Propeller 3 Inch Prop CW CCW for FPV Racing Quadcopter Frame Kit (Blue & Gray & (3 builds)

FPV Transmitter

Caddx Vista Kit with DJI Camera 720P 120FPS (23 builds)


ImmersionRC Ghost Atto 2.4GHz Micro Receiver w/ qT Antenna (20 builds)


Tattu R-Line Version 4.0 22.2V 6S 1050mAh 130C LiPo Battery - XT60 (21 builds)


RadioMaster TX16S MAX Pyrodrone Edition - Carbon Face Plate, Blue/Orange CNC parts, Black Leather Grips & 5000mAh 2S Li-Ion Batt (2 builds)


DJI FPV Goggles V2 for Drone Racing Immersive Experience, Black (236 builds)

Radio Module

AxisFlying THOR Pro ELRS 2.4GHz Transmitter Module

Radio Module

TBS Crossfire Micro TX V2 (154 builds)


iFlight FPV Drone Backpack (5 builds)
See Site


iFlight Crystal HD Patch 5.8GHz RP-SMA Antenna for DJI - LHCP - Choose Your Design (4 builds)
Show stores (7)


Sign in to comment

yves1984   Mar 17, 2022  

hi there. looks realy great your build. did u also have a picture how u mount the AIO and the vista inside?

ExplodingEvo   Mar 18, 2022 

I used this: to mount the AIO on 20x20 and used the furthest rear holes for the vista. I've actually changed this build to an Air unit and went to a 20x20 stack but I hate how it flies so I'll probably take it back to a vista at some point.

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more