Welcome to my first x8 Build. Wanted to it for a long time and finally Pulled the Trigger.
The T-Motor Velox V45A V2 has a 10pin Connector and the Lux H7 got 2x 8pin Inputs, since I needed to rewire the connector I took the 10V regulator and one ground out and put the rest into an 8pin connector.
I needed to print some Custom washers under the Vista and inbetween the ESCs. Also I needed smaller screws for the motors (M2x4).
AUW is about 500g with Hero 7 and Ovonic 1000mah 6S, flight time is about 3.5min when flying like a Cinewhoop with Gemfan D76 5-blade Propellers on top and Gemfan 3028-3 on the lower motors
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
i almost have the same setup do you have any pids you could share