The Unnamed

By WicketFPV on Mar 07, 2017

2  181  0

I designed a freestyle frame and this is the first prototype. I have gone through a few frames and there were always things I liked and didn't like about them so I set out to make something that I wanted. It's a 5" X Frame with a long enough body for components but no extra wasted space. The frame allows for either top or bottom battery mounting but with a HD camera you run out of a lot of room fast. Currently the frame is coming in at ~110g but I am hoping to get that down to 90-100g on the next revision. AUW is ~615g



Sign in to comment

Guides & Reviews

39 3,808  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,663  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more