Had this frame found in a surprise box, started by a forum member (DBK). Also had the motors from the former TP3, and a repaired GHF411AIO (esc burned) with a FalcoX license. So the setup is done.

As I also disassembled the "green goblin" (or "black widow"), I took the flysky fli14+ receiver. The caddx ant was the first used camera in the TP3, right before the caddx baby turtle whoop version took it's place.

The vtx was originally in the 4fast4furious, but I've put the caddx baby turtle whoop version in and the eachine nano vtx v3 has no space - but now a new workplace.

Update I:
maybe i've accidently burned the board again, or there is some kind of bridge under the replaced mosfet for motor 3, which was repaired recently. i didn't use the Fli14+ in this, i've bought some Happymodel EP-1 and this is the second rx i've used here.

Update II:
if i get my hands on another flightcontroller with good specs, i will try building this one again. at the moment, this frame isn't in use at all.