This build is a continuation from a previous build. The frame is a Pyrodrone version of the TBS Source One V3.

Using 6s LiPos with Hyperlite 2207.5 1922 Kv Team Addition motors, I set the pwm frequency to 48, Desync to the Blheli 32 default, and Thrust Linear to 25 in Betaflight. I like the smoothness of the motors set at a pwm frequency of 48. My Throttle has been Clipped to 93% in Betaflight.

The GoPro Hero 8, antenna mounts, and front bumper are from Brain3D. The GoPro Mount is set at 20 deg. Brain3D printed the motor guards from the STL file I sent them. Below is the link to the Skids from Thingiverse:

TBS Source One Motor Guards: https://www.thingiverse.com/thing:3912034
Thank you ShaunyShaun for the design.

A family member printed the GPS mount and battery cable holder for me. Below are the links to the STL files from Thingiverse:

XT-60 Battery Cable Holder:
https://www.thingiverse.com/thing:3446071
Thank you NerdyBeefcake for the design.

BN-220 GPS Arm Mount
https://www.thingiverse.com/thing:3886134
Thank you Sotex FPV for the design.

For extra strength to mount the FC and ESC, I used M3 34mm Buttonhead screws. I was able to find these screws from Hobby King.

Performance:
6s 1400 mAh Lipos-average 5 min 28 sec.
6s 1300 mAh LiPos-average 5.0 min 06 sec.

With my current VTX and Video Receiver set-up and the Micro TBS Crossfire unit transmitting 250mw , I have been able to fly out to approxiately 500m without issues.

Total Flight Weight: 872g.
Dry Weight: 510g.