Banggod 3 HDZero'ed

By d.m.p on Dec 07, 2021

4 318 2

We live in the middle of a city, so flying my 5" and 6" quads is challenging. I have to drive out to the country side to fly.

My wife noticed that I was getting a bit bumbed with not being able to fly without long drives to the country side, so she gave me the thumbs up to build a "small drone that wont scare small children when flown in the local parks".

So I got myself a 3" Banggod frame... and then fitted it with FETtec AIO G4 35amp FC with 1507 2800kv powered by a 6S 650 LiPo :|

This is also my first HDZero/SharkByte setup. Since the Shark Byte Vtx is only 200mw, I thought that a 3" that I fly short range might be the perfect setup (while I wait for the HDZero 1watt Vtx to ship to convert my 6" long range quad)

Things to improve: The Vtx antenna is connected via a UFL connector.. this make me a bit uncomfortable that it might come off during flight. I don't have liquid electrical tape or hot glue to give it more security, but I plan to get some, asap.

Photos

Part List

Frame	BangGOD 3 Inch (4 builds) Catalystmachineworks.com	$55.99
Flight Controller	FETtec AIO 35A Fettec.net	$99.00
Motors	4 x Ethix Flat Rats V2 1507 2800kv Team-blacksheep.com	$71.96
Propellers	HQ Prop V1S 3x4x3 Tri-Blade 3" Prop 4 Pack - Choose Your Color (41 builds) Racedayquads.com	$2.99
FPV Camera	Foxeer Digisight 2 Nano 720P Digital/Analog 4ms Latency Super WDR FPV Camera (9 builds) Pyrodrone.com	$49.90
FPV Transmitter	Fatshark SharkByte TX5S.1 Video Transmitter (8 builds) Pyrodrone.com	$50.00
Antenna	TBS TRIUMPH PRO (SMA STUB RHCP) (10 builds) Pyrodrone.com	$19.95
Receiver	TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER (1484 builds) Team-blacksheep.com	$24.95
Batteries	Tattu R-Line 650mAh 14.8V 95C 4S1P Lipo Battery Pack with XT30 Plug (19 builds) Pyrodrone.com	$15.99
Misc Parts	Ummagrip Universal Sticky Battery Pad (175 builds) Getfpv.com	See Site

Show stores (6)

Like Copy Part List Follow d.m.p

Discussion

okeydokey Jan 03, 2022

I zip tied the antenna lead using only one of the two holes and the outside edge of the board with the large flat chip. I know the holes are for the mipi but I haven't had an issue with the heat from the chip and the antenna lead

d.m.p May 07, 2022

I ended up crashing and the mipi and antenna got ripped out. The good news is that I have now upgraded to the Race Vtx 2 and have zip tied EVERYTHING! :D

Guides & Reviews

109 22,060 39

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

67 17,609 64

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews