Babyshot Y6 version 0.1

By nok-fpv on Dec 17, 2021

4 151 5

Babyshot Y6 version 0.1
Truthfully it should be be known as BangGoodshot version 0.1.
Remix of parts from babytricopter banggood frame as a primary frame, TBS source one for 5 inch arms for the front arm and discontinued banggood 5 inch freestyle frame for the rear. Additional holes were drilled on babytricopter frame using the additional frame arms as guides. Motor and prop set up is probably not efficient at all but it it just proof of concept.
Still pondering were to solder the telemetry output of the esc to the pdb that is why I still need to heat the shrinkwrap of the esc.

First maiden video:

Photos

Part List

Frame	Tricopter5 170mm Wheelbase 3mm Arm 5 Inch Tricopter Frame Kit for RC Drone FPV Racing Au.banggood.com	$27.25
Flight Controller	RADIX LI - brainfpv (3 builds) Brainfpv.com	See Site
ESCs	6 x T-Motor F35A 35A 3-6S Individual ESC Fpvfaster.com.au	See Site
Motors	6 x DYS SunFun 2306 Motor - 1750KV/1900KV/2500KV Getfpv.com	$77.94
Propellers	6 x HQProp Durable Propeller DP 4x3x3 (set of 4) - MantisFPV Mantisfpv.com.au	$27.00
FPV Camera	Caddx Mini Ratel Analog Camera (2 builds) Caddxfpv.com	$34.99
FPV Transmitter	ImmersionRC Tramp HV 5.8GHz Video Tx - V2 (141 builds) Nextfpv.com.au	See Site
Antenna	Foxeer Lollipop V4 5.8GHz SMA Antenna 2 Pack - Choose VersionRHCP / Black (20 builds) Racedayquads.com	$19.89
Receiver	TBS Crossfire Nano Rx Special Edition FPV Long Range Drone Receiver (159 builds) Pyrodrone.com	$29.95
Batteries	Tattu FunFly 1550mAh 4s 100C Lipo Battery (6 builds) Getfpv.com	$20.99
Power Distribution	Matek PDB-HEX PDB 2-12s Phaserfpv.com.au	See Site

Show stores (10)

Like Copy Part List Follow nok-fpv

Discussion

kwadkenstine Dec 18, 2021

Hi I have done similar in the past, If i may ,2 build tips
1 put some glue ore something between the motors to stop them touching and casing bad vibes.
2, make sure all prop nuts are tight , this format does not forgive loose props.
ENJOY !

Show 1 more comment

kwadkenstine Dec 18, 2021

Just goo it up to stop the long paralell unsupported members becoming tuning forks,

nok-fpv Dec 18, 2021

Got list of glue I could use to secure it?

kwadkenstine Dec 18, 2021

Something dense and flexy like eurethane based auto windscreen adhesive, designed to flex and not transmit vibrations.

Guides & Reviews

109 22,060 39

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

67 17,609 64

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews