This build came about because I had a spare Caddx baby turtle HD camera laying around and waned to use it.
The FC is a Flywoo F745, feature packed FC. I would not recommend this FC for people who are new to soldering, the pads are small and a real pain to solder and this is the V1.2 which is suppose to have better solder pads.
Its a tight build, works well due to the height of the frame. Downside is I cant use the SD card holder that comes with the baby turtle and run the risk of loosing the SD card in a crash. Still need to do a bit of tunning as I get motor noise in the HD feed somtimes.
Specs:
- Dry weight: 92grams
- Weight with 1000ma 3S: 130grams
Photos
Part List
Show stores (6)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for blue_r