Dead mini Q + drone bits = Franken Fun
By kwadkenstine on Jan 12, 2022
Just on a side note,
Other things .
Can be done with drone bits.
Flysky recievers will bind with many land controllers , or you can drive with the drone controller.
ESC , got a dead chanel on a 4 in one , put it in a car , Do not forget to tweek the settings in blhelli or some such.
A flight controller is not needed if a pdb with osd is used . But awd with torque vectoring . is an interesting hack of a fc, even if it is an old f3 .
Cheers
Photos
Part List
ESCs |
Diatone Mamba F40 40A 3-6S 30x30 4in1 ESC
(38 builds)
Racedayquads.com
|
$38.99 |
Motors |
4 x iFlight XING 1404 3800KV/4600KV/7000KV Unibell Toothpick Motor - Blue Camo (1pc)
(4 builds)
Getfpv.com
|
See Site |
FPV Camera |
Caddx DJI Digital HD FPV Camera
(164 builds)
Getfpv.com
|
See Site |
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
What do you do to the ESC's to get them to do the skid steer/torque vectoring?
Hi. I dont do a lot . I basically set the escs to brake on stop and bidirectional , also adjust ramp up power if needed,
I havent been bothered to figure out how to run with a fc in bf .
Just use a multi channel airplane reciever.run the left and right motors of channel 1 and 2 and mix in the radio as you would for a plane with elevons , means i only use the pitch and roll stick for forward back left right, . Lots of expo helps with control.
I have looked on the web for tutorials on how to use quad esc on cars etc , but their not much good , because their done by car or plane guys who dont really care too much about esc stuff , I wish a popular quad dude would do a tutorial on esc settings for other than quads, I am not good at that sort of thing, and when i have asked Mr big , I get fobbed off like an annoying child.
Cheers