This was a fun one. Printing the frame and canopy made you really get involved in the actual build. I haven't really got out to fly it yet but a little around the house and it's a fun one!
Frame |
The Microblivion II by Dave_C_FPV
(8 builds)
Thingiverse.com
|
See Site |
Flight Controller |
Toothpick F405 2-4S AIO Brushless Flight Controller 20A (BLHELI_32) V4
(18 builds)
Betafpv.com
|
$67.99 |
Motors |
4 x Happymodel EX1202.5 Motor - 6400KV/8000KV/11500KV
(8 builds)
Getfpv.com
|
See Site |
Propellers |
Gemfan Flash 2540 3-Blade Propeller Black
(171 builds)
Geekbuying.com
|
$4.18 |
FPV Camera |
Caddx Baby Ratel 2 1200TVL 1.8mm FPV Camera
(4 builds)
Getfpv.com
|
See Site |
FPV Transmitter |
ELRS Fyujon 2IN1 AIO module built in ELRS 2.4GHz EP receiver and OpenVTX
Fatboyfpv.com
|
See Site |
Receiver |
ELRS Fyujon 2IN1 AIO module built in ELRS 2.4GHz EP receiver and OpenVTX
Fatboyfpv.com
|
See Site |
3D Printed |
Toothpick Nano Pod Lite [14mm] by Dave_C_FPV
(13 builds)
Thingiverse.com
|
See Site |
3D Printed |
Nano Pod [14mm] by Dave_C_FPV
(7 builds)
Thingiverse.com
|
See Site |
What a fun project! I can't wait to hear more about this bird as you use it (I would love to see some dvr!)
That ELRS/openvTx board is SUPER COOL!!!
I see that the blue silicone FC mount on the side is significantly taller than the black one in the front. Is that intentional? or do you need more of one of those two colors?
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Why the hell designing 3d printed frames with flat arms ? We want a fluid dynamics expert in the room