Left all the connectors on because i like to try different motors, but still pretty light. Happymodel AIO w/ elrs & 200mw is very convenient.
Update: picked new hq 51x2 props and switched to 78mm frame. Definitely faster with 60% more disk area, at least 25% more flight time on 300mah. Auw is 38g, 3 grams heavier
Frame |
TKS 1s Rocket freestyle 75mm 1.5mm & 2mm carbon
(5 builds)
Jacks3dprinting.com
|
$14.00 |
Flight Controller |
Happymodel ExpressLRS ELRS 2G4 F4 Whoop AIO Flight Controller
(9 builds)
Pyrodrone.com
|
$65.99 |
Motors |
BETAFPV 4pcs 1102 18000KV Brushless Motor 1S FPV Motor for 1S Brushless Micro Whoop Drone Like Meteor75 1S Brushless FPV Micro D
(6 builds)
Amazon.com
|
$3.00 |
Propellers |
HQ Prop 40MMX2 Bi-Blade 40mm Micro/Whoop Prop 4 PackDefault Title
Racedayquads.com
|
$2.25 |
FPV Camera |
RunCam Nano 3 800TVL CMOS FPV Camera w/ Plug for Mobula 6
(21 builds)
Racedayquads.com
|
$17.99 |
Batteries |
BT2.0 300mAh 1S 30C Battery (8PCS)
(14 builds)
Betafpv.com
|
$29.99 |
Misc Parts |
LEDroneClub Runcam Nano 3 mount for Toothpick Frame 3D Printed TPU parts - RotorBuilds
Rotorbuilds.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I have been debating using this same aio board. How does it fly?
Its okay. I've had better luck with this than Betafpv elrs spi boards so far and vtx is built in. You have to drop PID loop to 2k to use RPM filtering otherwise RX won't stay bound. Helps so far to overclock cpu to 120mhz. But yeah it makes for a fun, light, easy build and works on 500hz elrs so I'm a fan.
I've got 2 of them, was happy enough with the 1st one. Even better on BF4.3-rc 2
thanks for the information. I'm going to try it for a baby tooth build, if the motors ever get back in stock.
Which motors are you wanting?
I was looking at the fpv cycle ones. just ordered them