Babytooth Pink Edition V2

By Mr_Stripes on Feb 27, 2022

5 209 2

Babytooth V1 was really fun... Untill I killed a motor (my fault the screws were too long). Time for v2!

Notes: Hglrc 1202.5 is actually made by rcinpower thats why I have them together.
3018-2 vs 3016-3: 3018 has higher top speed and more efficiency. 3016 has more control and feels more responsive/ "juicier". 3016 is also a touch quieter.
I cut off the back tab for mounting to fit the usb port. If you do this make sure to either wear a good mask or get the carbon wet. Carbon dust and lungs don't mix well.

It still needs a bit of tuning, as I am getting these weird vibrations. I just have Kabab's 4.2 tune on it though it is running 4.3 (elrs spi rx). 36grams dey weight with biblades, 37g wih triblades.

Photos

Part List

Frame	FPV Cycle Babytooth 3" Micro Frame - Choose Your Thickness (16 builds) Racedayquads.com	$11.99
Flight Controller	BetaFPV F4 1S 5A Toothpick/Whoop Flight Controller - Choose Version (14 builds) Racedayquads.com	$39.99
Motors	4 x RCinPOWER GTS-V2 1202.5 11500Kv Micro Motor - Choose Color (2 builds) Racedayquads.com	$46.36
Propellers	Gemfan Hurricane 3018 Durable Bi-Blade 3" Prop 8 Pack (2mm) - Choose Your Color (30 builds) Racedayquads.com	$3.29
Propellers	Gemfan Hurricane 3016 Durable Tri-Blade 3" Prop 4 Pack (1.5mm) - Choose Your Color (20 builds) Racedayquads.com	$2.59
FPV Camera	Caddx Ant Lite 4:3 FPV Camera - FPVCycle Edition (73 builds) Fpvcycle.com	$13.99
FPV Transmitter	Eachine NANO VTX 25-400mW 5.8GHz Micro VTX - U.FL (42 builds) Racedayquads.com	$20.99
Antenna	Jumper 150mm 2.4GHz IPEX1 Receiver Antenna for R8 (3 builds) Racedayquads.com	$0.99
Misc Parts	BeeBrain V2 Camera Mount and Canopy (38 builds) Fpvcycle.com	$2.99

Show stores (2)

Like Copy Part List Follow Mr_Stripes

Discussion

kaptn_kapton Mar 16, 2022

Hey, nice build! Have something similar in mind. How is your betafpv board holding up? My biggest concern is the 5A rating. Also i don't like the compatability of the babytooth frame with the usb/ceramic antenna position. I really hope that we will see another fc with 7-12A and ceramic antenna.
Best

Mr_Stripes Mar 16, 2022

I did kill one of the elrs spi rx of the 2 boards I had. Good news is there are pads to put in a ep2 or similar. 5amps seems to be fine, I push mine pretty hard and no problems. However, to kill 2 birds with one stone, betafpv makes a 1s 12a elrs aio. It wont be quite as light but it will be more durable.
https://www.getfpv.com/betafpv-f4-1s-12a-aio-brushless-flight-controller-elrs-2-4g-v2-0.html

Guides & Reviews

115 22,060 40

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

69 17,609 65

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews