A compact X8 build, 4" props, ~150mm frame, body in between top and bottom props. ;)
I've been waiting for someone to build this frame! The build looks SO good! You mentioned that you ran the esc wires in parallel? Just so you could run 8 motors from 4 d-shot outputs? How does it do verses an X8 with 8 D-shot outputs? I have a 4" X8 Tomoquads Katana LR that I custom rigged into an X8, but I used the SP Racing H7 mini (Which on a side note has 12 motor outputs!) and built it with 2-20mm 4in1 esc's. It flies pretty good, except Yaw is so lethargic until you put enough stick input in, and they it yaws way too far. Very weird, and I don't know a lot about tuning that out of an X8. I've been considering robbing that FC for another project, but contemplating running the esc's in parallel. Man, I'd LOVE to see some footage from this!! Kick ass build, absolutely love it!!
can it handle Gopro H10 without battery?
I'm about to design a tiny octo like this, but can't decide which motor and battery is best to lift GH10
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
The frame appears to be cut? What did you use to cut it if so?