I decide to convert my 3" IX3 Build (https://rotorbuilds.com/build/23752) to a 3.5" quad. The BetaFPV 1505 motors are powerfull enought to spin 5" 2 blades props. I hope the extra size will add some power over 3" props. (I will not be able to test it for few weeks since I injured severly my hand...)
Since the IX3 was using a dual stack I have been force to use 30mm standoff instead of 25mm for the carnage (CNCDrones can provide them). I have create printable parts for it. The RX is mounted with his antenna at the front. Normally the Carnage is a top mounted battery frame but I prefere under for the moment. The quad weight 165g (not on the hyper low side) with all the hardware and extra parts (Fullspeed Buzzer, LED, DualStack Board, Dorsal Fine, etc..). Thank you "CNCDrones" and "Sub 250g FPV" for this amazing design (https://rotorbuilds.com/profile/11377/).
Photos
Part List
Show stores (7)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for JTR1