A Tinyhawk 2 Race reframed with a 3d printed tinyhawk freestyle frame and a remixed canopy. now runs 65mm toothpick biblades. both frame and canopy were resin printed with different mixes of Sirayatech Tenacious and Anycubic Eco resin. titanium dioxide added as a strengthener.
first flight:
final auw with runcam thumb was 97grams..
Frame and canopy was painted with printer resin mixed with mica for tinting and cured under uv.(Really bad idea! Took all the flex out of the canopy and it shattered. but it looked cool...)
Frame |
Emax Tinyhawk Freestyle Frame by keylitho
Thingiverse.com
|
See Site |
Flight Controller |
Tinyhawk II Parts - AIO All-In-One FC/ESC/VTX F4 5A 25/100/200mw
(5 builds)
Emax-usa.com
|
$85.99 |
Motors |
4 x EMAX TH1103 - Tinyhawk Freestyle Tinyhawk Race replacement motor 7000kv 7500kv
(2 builds)
Emaxmodel.com
|
$39.96 |
Propellers |
USAQ 10 Pairs Kingkong 65mm Propellers for 716 720 8520 Coreless Motor Micro FPV Drone
(2 builds)
Amazon.com
|
$11.95 |
FPV Camera |
RunCam Nano 2
(184 builds)
Shop.runcam.com
|
$19.99 |
Batteries |
GNB 1S 660mAh HV 90C PH 2.0
(3 builds)
Rotorgeeks.com
|
$8.62 |
3D Printed |
tinyhawk 2 fc canopy for runcam thumb by buckerbuddy
(2 builds)
Thingiverse.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
A very interesting way to get a TH Race to carry a Thumb and spin 2.5" props! Looks like an interesting project 🙌