This is yet another Shendrone Squirt v2, and it may be the very last one I will build for a while because I have exhausted my supplies of extra parts. Just like all my previous builds, I used my custom modified STL files that was originally designed by Drone Co Productions. I made some height adjustments to the ducts, punched some holes in the camera and Gopro mount. Finally, I Frankensteined rear antenna and XT60 mount. Meaning, I hacked up a few different mounts to create this one.

I think the key to build are the 2205 2300kv motors paired with the tune that Robert Moss shared with us. This time around, I did not use a typical 20x20 stack, but a AIO instead. It does not really save you that much weight, but you do get a cleaner build with lot of extra space. Like with majority of the builds I have done in the past, most of the parts I used is what ever I come across. I am not particularly loyal to any specific brands, but I do have my favorites. For this build I happen to use the Flywoo GOKU GN722 HD EVO 40A AIO 20x20 FC/ESC.

:::::::::: Videos ::::::::::

Test Flight - GoPro 7

Same flight as the video above, but recording with the DJI Goggle's DVR