Libra 5 V2 was born as an evolution of Libra 5 (https://www.thingiverse.com/thing:5446882; https://rotorbuilds.com/build/29921).

It retains all the features of its predecessor and further improves its rigidity and impact resistance.

The thickness of the upper plate and of the intermediate ones has been reduced from 2.5 mm to 2 mm and the material gained has been distributed on the arms which, while maintaining a thickness of 6 mm, increase the section to guarantee extreme resistance.

The central node has been redesigned to increase the stiffness constraint on the X axis.

The camera support has been revised since in the previous version the spacers and the top plate were visible in the frame, now the problem has been solved.

The geometry of the bottom plate has been revised and optimized for greater rigidity and there are now 20x20mm slots to manage the position of the VTX or ESC at will with these fixing centers and two 25x25 holes to fix the Walksnail Avatar VTX.

The top plate has also been partially revised to allow easier use of a second lipo strap in the tail and also the one in the middle position.

All these advantages for only 5g more than the predecessor, thus reaching an overall weight (including all hardware) of 135g.

For all files, black box registration and much more, please refer to the Thingiverse link: https://www.thingiverse.com/thing:5583983

As for the previous version you can buy the frame on cncdrones at the following link: https://www.cncdrones.com/libra-5-v2.html