New setup for RcinPower 1207!
Frame: AlfaRC Apex 95mm carbon fiber frame
FC: JHEMCU GHF411AIO-BMI 40A F411 Flight Controller BLHELIS 40A 4in1 ESC 2-6S
VTX: Happymodel Upgraded VTX 5.8G 40CH 25mW~200mW
Propeller: Emax Avan 2019 3blade
Motor: RCINPOWER - GTS V2 1207 2-3S 6000KV (9,5g)
Camera: RunCam Nano 2
Weight: 95g
Battery:
GNB HV 3S 380mah (31g)
GNB 2S 660mAh (34g)
Summ weight: around 126-129g
Fly time: 4minutes
Photos
Part List
Show stores (5)
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Your build inspirited me to make a similar one. Thank you!
NONO not build like this with that motors.... motor is very good quality but totaly useless! I was using this 1207/6000KV motors into different setup problem is? it is over.... very powerful and extremely hungry! 3" or 2,5" 2 minutes flytime! 2" is OK but more better less weight motors 1207=10gramm 1203 1104 1105 (5-7gramm) is more better for this frame.....
That's why I've used 1204 5000KV in my build cuz 1207 had looked too heavy. But I've found RCINPower 1204 exactly after I've seen those 1207 in your build. It really helped me as a point to start from.
yes yes 1204/5000kv is more more better! possible to use it for 4S and 3inch setup!