Had some spare parts lying around, and wanted a 1s park flyer that I can just throw in the bag and do some real free -style and use with TBS Crossfire, I also didnt have a frame, so decided to 3d print one that has a solid reputation for stability / durability - the Micro 105mm - . Although this frame was primarily for brushed, I found a remix using brushless 1103 Motors, and a whoop style FC - (thx Merrilll Terry! ;)). Didn't want to use one of the old school canaopies, so I used one that was made for a Pickle Toothpick - With the 3d parts from old and new designs, and big antenna tubes, I figured the "ĴäćķÂŀõþê" was a fitting name. ;p

All up weight is 47g, not terrible but I wanted it a bit more durable. Besides the motor kv, batteries and connectors - are VERY important on a 1s build. I used an xt30 plug for the battery connector and a HV (4.39V) 90c battery - 660ma. This litte guy flys great and is pretty quick, and I get around 4 min on a pack.

Here is the maiden flight - (a bit windy, but still fun):