I was super scared to make a naked vista myslef, but I did it anyway and it's really not that hard for you tech-savy quad builders.
I like having different class quads for each scenerio and wanted a light 3 inch, since Kebab's TP3 is out of stock (It is now back in stock) I used a Crux3 frame from Aliexpress instead.
I used 20mm m2 screws for the stack with m2 gummies that I had cut to about 5mm length, I didn't drill the naked vista holes but instead threaded the screws through it, for me this is an advantage as most failure points of the naked vista is the boards touching eachother and by threading the boards there is less chance of unwanted board movement.
UPDATE: I originally went for Xing 1303 5000kv motors I already had but it flew terribly and shook like Elvis so I ordered FPV Cycle's 13mm 5000kv instead, that meant I also needed new 2mm shaft props so went for the Bi blades Gemfan 3018.
Dry Weight is 70 Grams including props and a rubber band for the battery.