Another way to print frames using the TKS Frame as an example.
Back in the summer of 2021 I tested diffrent ways of printing micro frames.
The goal was to print a micro frame that was as strong and stable as possible with ordinary filaments. In my opinion nylon, carbonx filaments and stuff like that have the problem that they are expensive and/or difficult to print. So I thought about whether I could combine the filament properties of PLA, PETG with TPU or Soft PLA. And it works.
how is it done?
The key is before the filament change takes place : rise the nozzle and bed temperatures abnormally high.
example: PETG (Prusa) on TPU(Sainsmart):
start with TPU
65 degree bed
220 degree nozzle
2 Layers before filament change:
Increase bed temperature to 100
increase nozzle temperature to 220-240
After tpu is printed:
quick switch to PETG
start printing PETG around 250-260 degrees (first layers hot as possible)
Bed temperature still at 100 and leave it there
print slowly with 10-30 mm / s
I think MIXED PRINTS are a cool thing to try and experiment.
I created a video in German. The subtitles were lost. I will add the subtitles next days.
Frame |
TKS ( Official Release ) by Tarkusx
(4 builds)
Thingiverse.com
|
See Site |
Flight Controller |
HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula 6 - Frsky
(7 builds)
Pyrodrone.com
|
$64.99 |
Motors |
4 x HGLRC AEOLUS 0802 Brushless Motor (12000KV/17000KV / 22000KV / 25000KV)
(3 builds)
Hglrc.com
|
$39.96 |
Propellers |
4 Pairs Gemfan 40mm 1610 1.6x1.0 1.6 Inch 2-Blade Propeller 1.0mm / 1.5mm Hole for Flywoo Firfly 1S Nano Baby RC Drone FPV Racin
(17 builds)
Banggood.com
|
$3.69 |
FPV Camera |
RunCam Nano 3 800TVL CMOS FPV Camera
(11 builds)
Newbeedrone.com
|
$19.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I see a lot of updates to the frame, less diagonal bracing, more motor protection, more thiccness. What changes have you noticed, in flight, and in crashes? What is the weight difference?
Can't wait for pics of it built up!!
To be clear: These frames are by Trakusx https://www.thingiverse.com/tarkusx/designs. This is only about mixed printing using the example of the TKS/TKS Echo frame. I only made a remix of the TKS with diagonal struts for testing purposes because I had the problem that the frame broke very quickly in PLA or PETG. These diagonal struts improve durability but affect airflow. Keep that in mind.
try Impact PLA by fiberlogy. I crash a lot and it,s still
holding on a 2inch tks racer build