After the 6inch apex that wasn t as expected, i figured it out that 5.5 would be a compromise closer to what i have in mind.
tried to use the 2505 motors and it seems that they are a bit more efficient at mellow flying, as soon as you request more power from them, they use more current that some typical 2207 motors.
That being said, probably will need replacement of the motors.
Need a bit more testing
dvr here from maiden flight here
Great build! Antennas and VTX are located near the GPS - are there any problems with satellite reception? If possible - links to 3d models.
https://www.thingiverse.com/thing:5686412 i normally keep the vtx unplugged until i lock signal on the gps.
Wire screening helps also.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Excellent build. Could you share a 3d model for mounting antennas and GPS?
https://www.thingiverse.com/thing:5686412