My low riding LoFlo

By animatedlim_fpv on Mar 23, 2017

9  670  0

An another addition to my fleet.... getting in on the Lo ride flying quad trend. Body is about 20mm high. Haven't had a chance to fly it yet due to the rain. Maybe early next week. So I can't really say about the flight characteristics. W/o lipo & GoPro auw 373g. With 1300mah lipo/Session/cam. mount = 596g.

Photos

Part List

Frame

LoFlo Freestyle Frame (5 builds)
Craftquads.com
$130.00

Flight Controller

FlyduinoKISS 32-Bit Racing Drone Flight Controller (v1.03) (180 builds)
Bhphotovideo.com
$35.00

ESCs

4 x FlyduinoKISS 24A 2-5S Race Edition ESC (122 builds)
Bhphotovideo.com
$91.80

Motors

4 x ZMX Fusion X25 2206-2300KV (2 builds)
Fpvempire.com
$67.04

Propellers

RaceKraft 5 Inch Tri-Blade Propeller Insane Speed - Transparent RK5051 (23 builds)
Getpropsman.com
$3.99

FPV Camera

RunCam Swift IR Block Orange ***Choose Lens Type*** (198 builds)
Pirofliprc.com
$36.99

FPV Transmitter

TBS Unify Pro HV 5.8 GHz Video Transmitter (587 builds)
Fpvheadquarters.com
$49.95

Antenna

TBS Triumph 5.8 GHz Antenna - SMA (542 builds)
Fpvheadquarters.com
$39.95

Receiver

FrSky XSR CPPM/S.Bus Receiver (35 builds)
Fpvheadquarters.com
$14.99
Show stores (6)

Discussion

Sign in to comment

Guides & Reviews

55 4,366  44
28 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,651  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more