FlexRc SkyHopper 3" frame, xing 1404 4600kv motors, F7 blheli_32 aikon aio, vista pro, 4s. 139 grams dry weight. 243 grams with a rdq 850 mah 4s.
Frame |
SkyHopper 3″ – FPV Toothpick Drone Frame
(2 builds)
Flexrc.com
|
$34.44 |
Flight Controller |
Aikon 3-6S F7 Mini AIO Whoop Flight Controller w/32Bit 45A 4in1 ESC
Racedayquads.com
|
$129.99 |
Motors |
4 x iFlight Xing2 1404 4600KV Motor
(3 builds)
Pyrodrone.com
|
$63.96 |
FPV Camera |
Nebula PRO Vista Kit HD System
(3 builds)
Drone-fpv-racer.com
|
See Site |
FPV Transmitter |
Caddx Nebula Pro Vista Kit 720p/120fps Low Latency HD Digital System For DJI FPV
(164 builds)
Pyrodrone.com
|
$164.99 |
Receiver |
TBS Crossfire Nano Rx FPV Long Range Drone Receiver
(1498 builds)
Pyrodrone.com
|
$24.95 |
Radio |
FrSky ACCST Taranis Q X7 Transmitter 2.4G 16CH Mode 2 White Black International Version for RC Drone
(263 builds)
Banggood.com
|
$139.99 |
Goggles |
DJI Digital HD FPV Goggles
(146 builds)
Getfpv.com
|
See Site |
Radio Module |
TBS Crossfire Micro TX V2
(154 builds)
Team-blacksheep.com
|
$69.95 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
How do you like the aikon aio. Did you have to drill m2 to m3 holes?
First flight will be today ill let you know. Quality looks good though. I used the included gummies that take the m2 hardware frame is m2 as well.
On site it said that mounting is m3? Do you use m2 or m3 to mount aikon aio?
m2
Can you send me close up of aio? I am interested in puting it in aos 3.5 v2.
put a pic above of the fc before i installed it. Also the aio is m3 holes not m2 my bad. the grommets make it m2
SO aikon include grommets that make m3 to m2?
So you use m3 to m2 rubber grommets to mount it?
yeah they are basically whoop grommets.