my favorite build of all time! i fly this most of all builds I've created. And has gone through some many different upgrades over the past couple years.
when first built i used iflight xing 2305 camo motors with a mamba MK2 stack with Rush Tank ultimate vtx and caddx ratel v1.
in the past year though ive upgrade to a Mamba Mk4 with 55a pro esc. and am now running with Fpvcycle 25mm imperial motors. Which are freaking Amazing . flight time on 6s with aggressive freestyle i can manage 5-6 minutes of flight time spinning Ethix S5 props. Durable and hardly Ever get hot only seldom warm to the touch. Vtx as of yesterday went from the Rush Solo to the new Rush Max Solo! With the Foxeer Faulkor mini camera.
Can you see why this build is my favorite?!?
have had to replace a couple arms an stack screw but not once any Fpvcycle motors.
no LEDs on this daily flyer.
Added Bling, gold standoff an matching gold counter sunk washers. 3d prints are from Brain3d an are clean prints.
almost forgot....i can get close to 7min of cruising while carrying a hero8 or 5 minutes with a GoPro flying aggressively.
Due to Washington State weather its been raining so testing of the Max Solo vtx will be done later on this week. with the Rush Solo I've been able to fly out over a mile before any break up. i expect twice that with the Max!
Frame |
Pyrodrone Source One V3 5inch Frame Kit
(7 builds)
Pyrodrone.com
|
$26.95 |
Flight Controller |
Diatone MAMBA MK4 F722 APP Flight Controller - 30x30mm
(5 builds)
Pyrodrone.com
|
$58.99 |
ESCs |
Diatone Mamba F50_BLS 50A 3-6S 30x30 4in1 ESC
(7 builds)
Racedayquads.com
|
$43.99 |
Motors |
4 x FPVCycle 25mm Motor - The Extra Smooth One
(22 builds)
Fpvcycle.com
|
$43.96 |
Propellers |
HQ Prop ETHIX S5 5x4x3 Tri-Blade 5" Prop 4 Pack - Light Grey
(80 builds)
Racedayquads.com
|
$3.49 |
FPV Camera |
Foxeer Falkor 2 Mini FPV Camera 1200TVL Global WDR
(5 builds)
Fpvfaster.com.au
|
See Site |
Antenna |
TBS Triumph Pro (U.FL RHCP)
(32 builds)
Pyrodrone.com
|
$19.95 |
Receiver |
TBS Crossfire Nano Rx FPV Long Range Drone Receiver
(1500 builds)
Pyrodrone.com
|
$29.95 |
Batteries |
CNHL Black Series 22.2V 6S 1300mAh 100C LiPo Battery - XT60
(44 builds)
Racedayquads.com
|
$29.99 |
3D Printed |
TBS Source One Accessory Kit
(14 builds)
Brain3d.co
|
$32.00 |
Nice looking build Lynx. I'm about to order a set of those same motors for my 5" build. Chris Rosser just released a new video showing that they performed very, very well compared to similar motors. Thanks for the writeup.
yes, this is really nice thank you for sharing such a post with me
https://tutuappvip.co/mobdro-download
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Nicely constructed, Lynx. For my 5" project, I'm going to order a set of those same motors.