By SuperRoach on Jan 21, 2016

1  265  1

Krieger 200


Part List


ShenDrones Krieger

Flight Controller

Acro Naze 32 Flight Controller


4 x LittleBee 20A Opto ESC with BLHeli firmware


RCX07-410 : RCX H2205 (V2) 2350KV Multirotor Outrunner Brushless Motor (Motion Balanced) [RCX07-410] Review - USD12.99 : rcMart
See Site


HQProp 5x4.5 Bullnose Two Blade CCW - Carbon (pack of 2)


HQProp 5x4.5R Bullnose Two Blade CW - Carbon (pack of 2)

FPV Camera

Super Mini DC5V-22V 17*17mm 600tvl Sony Super HAD CCD Camera

FPV Transmitter

Angry Beez FX799T 200mw 40 CH Video Transmitter (37 builds)


FrSky X4R-SB - 3/16 Channel Receiver w/ SBUS (52 builds)

Power Distribution

Foxeer PDB with 12V/5V Dual UBEC 12V
Show stores (5)


Sign in to comment

SuperRoach   Jan 21, 2016  

I made a guide about wiring up the flight controller to the X4R-SB to take advantage of the SmartPort and Sbus options:

Been a fun and slow build, although far faster than the LKTR120. Good frame and surprisingly more than enough room inside the frame to place all of your components needed. LEDs are mounted with adhesive double sided tape at the moment which I'm weary of if they heat up. Which will be likely in a 4S Build.

Guides & Reviews

39 4,073  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,856  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more