OG Toothpick build. Original build date May 2019
Dry weight ≈ 40g
AUW ≈ 67g
Kababfpv Toothpick build using the original toothpick frame which was only large enough to handle 65mm or 2.5" props. This craft on 2s was and still is a blast to fly.
This setup is the way it was originally built, it has since gone through many iterations. Original build used a crazybee f4 v1 which is no longer listed anywhere, the v3 is the replacement board.
Kababs Video
Frame |
KababFPV Toothpick Micro Frame Kit - 110X Motor Mount
Dronecosmo.com
|
$15.99 |
Flight Controller |
HappyModel CrazyBee F4 Pro V3 AIO Whoop Flight Controller for Larva, Sailfly, Mobula - FRSKY
(32 builds)
Racedayquads.com
|
$47.99 |
Motors |
4 x AMAXinno 1103 7500kv 3-hole mount
Rotorgeeks.com
|
$60.68 |
Propellers |
Gemfan 65mm Bi-Blade 2.5" Prop 8 Pack (1.5mm Shaft) - Choose Your Color
(4 builds)
Racedayquads.com
|
$2.99 |
FPV Camera |
HCF7 5.8G 48CH 25MW VTX 700 TVL 120 degree CMOS Wide Angle NTSC FPV Camera
(3 builds)
Pyrodrone.com
|
$21.99 |
Batteries |
GNB 1S LiPo Battery 600mah XT30 (Three-Pack)
(8 builds)
Fpvcycle.com
|
$16.99 |
Misc Parts |
BeeBrain V2 Camera Mount and Canopy
(38 builds)
Fpvcycle.com
|
$2.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for Hyperflyt