Morphite 180 v1

By MacFly on Jan 25, 2016

1  213  0

Proposed build: Armattan Morphite 180 v1 with extended top plate

Part List

Frame

FPV Morphite 180 Full Top Plate
Armattanquads.com
$6.75

Frame

FPV Morphite 180 *Discontinued (4 builds)
Armattanquads.com
$39.00

Flight Controller

MINI NAZE32 ACRO Flight Controller 32bit STM32 Processor PWM PPM RC Input for FPV Multicopter
Banggood.com
$19.89

Motors

RCX H1806-6 2400KV Micro Outrunner Brushless Motor (Best for 200-300 frame) (2 builds)
Myrcmart.com
$14.99

Motors

3 x Propeller Mount (Φ5mm / CCW / H1806 / Silver Bullet)
Myrcmart.com
$5.97

Propellers

2 Pairs Tri-blade DALprop T4045BN Bullnose Propellers for FPV Racing (5 builds)
Surveilzone.com
$1.50

FPV Camera

Foxeer HS1177 XAT600M DC5V-22V 600tvl Sony Super HAD CCD FPV Camera (71 builds)
Surveilzone.com
$14.99

FPV Transmitter

RCX TS5828 5.8GHz 32CH Mini FPV Video Transmitter (600mW / RP-SMA-JACK) (4 builds)
Myrcmart.com
$16.99

Antenna

2X SKYSTARS FPV 5.8G Mushrooms Transmitting Receiving Bore Antenna TX RX For FPV RC Multicopter (4 builds)
Banggood.com
$12.89

Receiver

FrSky D4R-II 4ch 2.4Ghz ACCST Receiver (w/telemetry) (14 builds)
Hobbyking.com
$25.85

Batteries

Turnigy nano-tech 1000mAh 3S 45~90C Lipo Pack
Hobbyking.com
$13.54

Goggles

Quanum DIY FPV Goggle V2 w/5 inch LCD Monitor (Kit) (7 builds)
Hobbyking.com
$64.58

HD Camera

RunCam 2 (7 builds)
Shop.runcam.com
$99.00

HD Camera

Original XiaoMi Yi Ambarella A7LS BSI CMOS WIFI Sports Action Camera
Banggood.com
$74.99

HD Camera

runcam2 30deg mount runcam runcamhd2
Thingiverse.com
See Site

Misc Parts

10PCS 5V Active Buzzer Magnetic Long Continous Beep Tone Alarm Ringer 12MM (3 builds)
Ebay.com
$1.67
Show stores (8)

Discussion

Sign in to comment

Guides & Reviews

39 3,808  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,663  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more