5" Morphite v2

By MacFly on Jan 25, 2016

2  176  0

Draft/Proposed build: Armattan Quads Morphite v2 5" 224mm version

Part List

Frame

Morphite V2 Frame (Out of stock)
Armattanquads.com
$80.00

Flight Controller

Naze32 Flip32 Flight Controller With 32-bit STM32 10Dof
Banggood.com
$23.99

Motors

RCX H2205 (V3) 2350KV Multirotor Outrunner Brushless Motor (NEW! CNC7075 Upgraded!) (3 builds)
Myrcmart.com
$12.99

Propellers

2 Pairs Tri-blade DALprop T5045BN Bullnose Props for FPV Racing (3 builds)
Surveilzone.com
$1.50

FPV Camera

Foxeer HS1177 XAT600M DC5V-22V 600tvl Sony Super HAD CCD FPV Camera (71 builds)
Surveilzone.com
$14.99

FPV Transmitter

RCX TS5828 5.8GHz 32CH Mini FPV Video Transmitter (600mW / RP-SMA-JACK) (4 builds)
Myrcmart.com
$16.99

Antenna

2X SKYSTARS FPV 5.8G Mushrooms Transmitting Receiving Bore Antenna TX RX For FPV RC Multicopter (4 builds)
Banggood.com
$12.89

Receiver

FrSky D4R-II 4ch 2.4Ghz ACCST Receiver (w/telemetry) (14 builds)
Hobbyking.com
$25.85

Batteries

Turnigy nano-tech 1300mAh 4S 45~90C Lipo Pack
Hobbyking.com
$19.60

Power Distribution

Matek Mini Power Hub Power Distribution Board PDB With BEC 5V And 12V for RC Drone FPV Racing (50 builds)
Banggood.com
$6.01

Goggles

Quanum DIY FPV Goggle V2 w/5 inch LCD Monitor (Kit) (7 builds)
Hobbyking.com
$64.58

HD Camera

RunCam 2 (7 builds)
Shop.runcam.com
$99.00

HD Camera

Original XiaoMi Yi Ambarella A7LS BSI CMOS WIFI Sports Action Camera
Banggood.com
$74.99

HD Camera

runcam2 30deg mount runcam runcamhd2
Thingiverse.com
See Site

Misc Parts

Matek 8 Bit WS2812B RGB 5050 Highlight LED for Naze32 CC3D Flight Controller (6 builds)
Banggood.com
$4.29

Misc Parts

Rotorgeeks Battery Strap - 20x210mm (10 builds)
Rotorgeeks.com
$4.26

Misc Parts

10PCS 5V Active Buzzer Magnetic Long Continous Beep Tone Alarm Ringer 12MM (3 builds)
Ebay.com
$1.67

Misc Parts

Suleve™ M3NH5 180Pcs M3 Nylon Screw Black Hex Screw Nut PCB Standoff Spacer Column Assortment Kit (4 builds)
Banggood.com
See Site
Show stores (9)

Discussion

Sign in to comment

Guides & Reviews

39 3,808  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,663  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more