Using some parts from the storage room.
Gyroflow Shaking issue
esc with 96 and 48 tested. I'll print a tpu for the camera and will update the post.
Getting around 5 - 6 min flight time.
Frame |
ProTek25 Frame Kit
Shop.iflight.com
|
$33.99 |
Flight Controller |
JHEMCU GHF405 PRO Bluejay 40A 3-6S AIO Whoop Flight Controller
(10 builds)
Pyrodrone.com
|
$66.99 |
Motors |
4 x FIVE33 Tiny Trainer 1404 4533KV Motor (Set of 4)
Getfpv.com
|
See Site |
Propellers |
para Nazgul Cine 2525 2 5 Pulgadas Tri-Blade / 3 Blade Propeller Prop CW CCW para FPV Protek25 Gris Party Drone Baifantastic
Amazon.es
|
See Site |
FPV Camera |
DJI O3 Air Unit
(86 builds)
Pyrodrone.com
|
$228.99 |
Receiver |
TBS Crossfire Nano Rx FPV Long Range Drone Receiver
(1499 builds)
Pyrodrone.com
|
$24.95 |
Batteries |
Tattu R-Line 650mAh 4S 95C Lipo XT30
(13 builds)
Rotorvillage.ca
|
$22.99 |
Misc Parts |
Accueil
(7 builds)
Drone-fpv-racer.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Does it work well? incredibox sprunki
It's great to see you using parts from your stash to build your drone, and despite the issues with the Gyroflow, printing the TPU for the camera will definitely improve the flying experience; 5-6 minutes of flight time is a great start!
I loved this build, you can see the video. no tpu extra needed
i had to use some parts for a tiny one so, is d for now
https://youtu.be/08fMLj4K_Ow?si=2tyjZP5FlTJ15kPP