2024 65mm Tiny Whoop Race Build
By Werdna FPV on Jan 24, 2024
This build won 3rd place at Whooptopia 2024
Highlights of this build:
í ½í° AUW of 17.2 grams - good balance between light weight and durability
í ½í° New Gemfan 1219-S props - responsive, lightweight and grippy through the entire throttle curve
í ½í° VCI 29,000kv 0702 motors with dual ball bearings - super smooth and powerful
í ½í° Betaflight 4.5.0 KAACK firmware with Justice Spicy Tune + Sheesh filters
Photos
Part List
Frame |
BETAFPV - Meteor65 ***AIR*** Brushless Whoop Frame
(5 builds)
Webleedfpv.com
|
$3.99 |
Flight Controller |
HappyModel CrossF4 ELRS BMI270 F411 Flight Controller Onboard 1-2S 4in1 5A ESC UART ELRS 2.4GHz RX for Tinywhoop FPV
(4 builds)
Xt-xinte.com
|
$35.17 |
Motors |
4 x VCI Spark 0702 Dual-Bearing Micro/Whoop FPV Drone Racing Motors (Set of 4) - Choose Kv
Wrekd.com
|
See Site |
Propellers |
GEMFAN PROPS 31MM, 1MM SHAFT 1219S-3 BLADE
Webleedfpv.com
|
$3.29 |
FPV Camera |
Tiny Whoop Pinch Premium FPV Camera - Standard Wide FOV
(7 builds)
Tinywhoop.com
|
$18.99 |
FPV Transmitter |
HappyModel OVX300 25-300mW 5.8GHz U.Fl VTX w/ OpenVTX
(3 builds)
Racedayquads.com
|
$27.99 |
Batteries |
Tattu 300mAh 3.8V HV 75C 1S1P LiPo Battery Pack With BT 2.0 Plug - 5PCS
(6 builds)
Pyrodrone.com
|
$24.00 |
3D Printed |
Orangestuff Camera Mount
(2 builds)
Tinywhoop.com
|
$2.25 |
Choosing a top-mount frame for drones, like the iFlight ix2 2.5 V3, can be tricky due to limited reviews. This frame offers affordability and reliable carbon quality, making it a practical choice. Drift Hunters
Do you need the O3 canopy to fit 30 mm stack, please? If you build analogue with 30 mm stack would a "normal" canopy suffice with clearance?
Which other motors can you recommend. Those unluckily aren't available in europe
Hey.
You can try the Betafpv 702 motors - bearing version. If buying from Betafpv do use my affiliate code
https://betafpv.com/werdnafpv
There is also RCinpower 702 releasing soon which is fantastic. Keep a lookout for it
@fnaf world What available motors would you suggest?