This was a build I have been working on for while now. I was able to utilize Solidworks and completely model every component for a very tight fit. The updated SpeedBee F7 Board with access to Betaflight via my cell phone works like a champ. I have not been able to get the camera control working at this point. I have alway been a huge fan of TBS Crossfire and now that both the vtx and rx (Sxity9) are on the same board this made for a very simple build with minium soldering. Besides the ribbon cable from the esc to the fc everthing else was soldered in. I have decided to not utilize the TBS Smartaudio and just use my Radiomaster Boxer to control the VTX. Thanks for looking and if you have any questions or recommendations please let me know.
Photos
Part List
Show stores (11)
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
So clean!
Lots of propellers around. Maybe it will keep its balance extremely well.