I've been flying this frame in FPV Logic sim and decided to build it IRL
The SpeedyBee stack has some nice features (battery indicator & bluetooth) and there were no surprises during the build and setup
The Volador VX3 is an easy frame to build and came with everything I needed including some quality 3d printed parts.
The Walksnail Pro camera sticks out the front and is not protected by the frame. The Camera Butter ND filter fits the Walksnail pro camera and adds some protection, however it should be noted that it adds some vignetting in the footage that is easily cropped out when using gyroflow to stabilize the video.
The Warlksnail VTX cables didn't have a lot of clearance from the propellers, so I ended up removing the connector and soldered them directly to the VTX
188g without battery or camera
219g with runcam thumb & 3d print (no battery)
241g with Tindling 450mAh 4s LiPO (no runcam)
Photos
Part List
Show stores (6)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for nf4000